Whenever I issue `show version` command in Cisco APIC, I'm getting weird output like this.
Not sure why the hostname of controller AB_CDE_FGH_IJ_ACI_APC-0001 is separated into 2 lines which make the output very weird.
The same thing goes with other hostname as well
Actual Output
AB_CDE_FGH_IJ_ACI_APC_0001# show version
Role Pod Node Name Version
---------- ---------- ---------- ------------------------ --------------------
controller 1 1 AB_CDE_FGH_IJ_ACI_ 3.2(4e)
APC-0001
controller 2 2 AB_CDE_FGH_IJ_ACI_ 3.2(4e)
APC-0002
controller 3 3 AB_CDE_FGH_IJ_ACI_ 3.2(4e)
APC-0003
spine 1 111 AB_CDE_FGH_IJ_ACI_SPN_01 n9000-13.2(4e)
11
spine 1 112 AB_CDE_FGH_IJ_ACI_SPN_01 n9000-13.2(4e)
12
spine 1 113 AB_CDE_FGH_IJ_ACI_SPN_01 n9000-13.2(4e)
13
leaf 1 1101 AB_CDE_FGH_IJ_ACI_LEF_11 n9000-13.2(4e)
01
leaf 1 1102 AB_CDE_FGH_IJ_ACI_LEF_11 n9000-13.2(4e)
02
leaf 1 1103 AB_CDE_FGH_IJ_ACI_LEF_11 n9000-13.2(4e)
03
Is there a way to fix this?
Desired output
AB_CDE_FGH_IJ_ACI_APC_0001# show version
Role Pod Node Name Version
---------- ---------- ---------- ------------------------ --------------------
controller 1 1 AB_CDE_FGH_IJ_ACI_APC_0001 3.2(4e)
controller 2 2 AB_CDE_FGH_IJ_ACI_APC_0002 3.2(4e)
controller 3 3 AB_CDE_FGH_IJ_ACI_APC_0003 3.2(4e)
spine 1 111 AB_CDE_FGH_IJ_ACI_SPN_0111 n9000-13.2(4e)
spine 1 112 AB_CDE_FGH_IJ_ACI_SPN_0112 n9000-13.2(4e)
spine 1 113 AB_CDE_FGH_IJ_ACI_SPN_0113 n9000-13.2(4e)
leaf 1 1101 AB_CDE_FGH_IJ_ACI_LEF_1101 n9000-13.2(4e)
leaf 1 1102 AB_CDE_FGH_IJ_ACI_LEF_1102 n9000-13.2(4e)
leaf 1 1103 AB_CDE_FGH_IJ_ACI_LEF_1103 n9000-13.2(4e)
