cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

347
Views
0
Helpful
2
Replies
Luis Perez
Beginner

IPN device for ACI Multipod using Catalyst 3850

Is possible to use a Catalyst 3850 as IPN device for Multipod deployment, i was looking and found Catalyst 3850 doesnt support PIM-BIDIR.

1 ACCEPTED SOLUTION

Accepted Solutions
Robert Burns
Cisco Employee

You answered your own question.

Robert

View solution in original post

2 REPLIES 2
Robert Burns
Cisco Employee

You answered your own question.

Robert

View solution in original post

IsaacGV
Beginner

The IPN devices must support few specific functionalities:

  • Multicast
  • PIM BIDIR
  • DHCP Relay
  • OSPF
  • Increased MTU
  • Layer 3 sub-interfaces
  • QOS considerations

The recommendation is to deploy, when possible, switches of the Cisco Nexus® 9200 family or switches of Cisco Nexus 9300 second-generation (or older) family (i.e., EX models or newer), as they are the ones most commonly found in production and also the ones more frequently validated in Cisco internal testing.

https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/application-centric-infrastructure/white-paper-c11-737855.html

Content for Community-Ad