Nexus 9300-EX (LEAF), setting up out-of-band management connection using SFP, not RJ-45
My LEAF hardware consists of Nexus 9300-EX (YC, TC and LC models). The Management port on these models have two options, RJ-45 or SFP. Using RJ-45, the OOB port is up and reachable. However, we are trying to use 1G SX SFP transceivers for OOB connectivity - this does not work. Based on Cisco documentation, this option is available.
Setting Up an Optional Management Connection (link)
Hi all,not sure this is the right place to raise my question..if not..beg you pardon.problem: I have to interconnect 2 datacenter with 2 links 10gb each so...10+10physical connection is DWDM (dark fiber) and each datacenter has is own nexus93108 (as ...
Coming soon - Be the first to know about the New Product/Release Series. Join Customer Connection to register for the briefings throughout the month of October!
Membership in the Cisco Customer Connection program is required to attend. Registra...
Description:Fault delegate: A Fabric Node Group (fabricNodeGrp) configuration was not deployed on the fabric node 152 because: Node Not Registered for Node Group Policies Type:Config Cause:configuration-failed Change Set:deplSt:not-register...
<original blog published on cisco @ https://blogs.cisco.com/datacenter/cisco-mds-32g-fibre-channel-fabric-switches-small-doesnt-mean-less >
When we think about fabric switches, we tend to consider low-end hardware. These typically do ...
Cisco Champion Radio · S7|E34 Cisco HyperFlex with iSCSI Helps Consolidate Workloads
IT organizations that get the most out of their technology investments tend to grow faster than their peers. As a result, they are always exploring enhancements to exist...