10-28-2019 03:42 PM
I do not have an image file on the tftp server. I was trying to reboot the server so I can test out my new config file through the POAP process and I got into the loader mode. I can set up the ip address and gateway through the loader commands but I don't know how to load an image from the switch. What can I do? How do I copy the image into my tftp server? Kindly help!
My current dir looks like this:
bootflash::
lost+found
.patch
.rpmstore
n9000-epld.9.2.2.img
home
bios_daemon.dbg
.swtam
virtual-instance
scripts
platform-sdk.cmd
license_FDO23******_10.lic
20191025_215124_poap_29846_init.log
20191025_215124_poap_29846_1.log
20191025_215124_poap_29846_2.log
20191023_202243_poap_29849_init.log
20191023_205742_poap_29857_init.log
20191024_191156_poap_29857_init.log
20191024_191156_poap_29857_1.log
20191024_191156_poap_29857_2.log
20191024_214717_poap_29871_init.log
20191025232626_poap_29846_script.log
20191025232723_poap_29846_script.log
20191025232433_poap_29846_script.log
20191025232530_poap_29846_script.log
10-29-2019 12:13 AM
Hello,
Please refer to this Cisco weblink for the loader prompt procedures.
HTH.
Jay O.
10-29-2019 04:20 PM
11-04-2019 04:38 AM
can you provide the whole log from where you define the tftpboot path cli
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: