cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
configure & troubleshoot anyconnect
355
Views
0
Helpful
3
Replies
Beginner

Replace ACI leaf node with a different model

I have a small ACI fabric in prod. I need to replace a 9300 leaf with another different 9300 model. I would like to keep using the same node Id and node name. So the related policies are pushed by APIC. I know this works for the same model of switches, such as for RMA. But I am not sure if that works for different switch models. The two different switches are the same generation though.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Replace ACI leaf node with a different model

3 REPLIES 3
Cisco Employee

Re: Replace ACI leaf node with a different model

Highlighted
Beginner

Re: Replace ACI leaf node with a different model

Thanks, I do have that link and as matter of fact, I did put in a comment for that article asking the same thing :)

Beginner

Re: Replace ACI leaf node with a different model

Here's the exact procedure on 4.1.1i

Virtual Port Channel Migration - Migration of Nodes from a First-Generation Switch to a Second-Generation Switch

 

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/hw/aci_hig/guide/b_aci_hardware_install_guide/b_aci_hardware_install_guide_chapter_011.html#id_97986

CreatePlease to create content
Content for Community-Ad
June's Community Spotlight Awards