cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
7795
Views
5
Helpful
1
Replies

SPAN in ACI

Helmi Muzammil
Level 1
Level 1

Hi All,

Can I SPAN the EPGs (everywhere) to a directly port attached in the specific leaf?

i have 2 spines and 20 (1-20) leafs with almost 50 EPGs. and i want to SPAN 50 EPGs around the 20 leafs to a specific port in the leaf 15 ( monitoring server that is directly connected to leaf 15 )

Thanks,

Helmi

1 Reply 1

Cristian Munoz
Cisco Employee
Cisco Employee

Hi Helmi, 

ACI has three types of SPANs. Each one of this see specific traffic, or in order words has its own purpose. 

To see packets going out / coming in specific port, go for >  Access SPAN 

To see packets going across Leaves, Go for Fabric SPAN.

For packets on specific EPG regardless of physical ports, Tenant SPAN is that you are looking for. 

In the GUI >  Under Tenant > Troubleshoot Policies > SPAN. 

1. Create Tenant Destination Groups.

2. Create SPAN Source Group.

3. Create SPAN Destination Group. 

Cisco APIC Troubleshooting Guide

Hope this helps!

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Save 25% on Day-2 Operations Add-On License