here is what I get :
Current config :
probe http P_HTTP_TEST
interval 5
passdetect interval 2
passdetect count 2
request method get url /test
expect regex trululu
sh probe P_HTTP_TEST detail
probe : P_HTTP_TEST
type : HTTP, state : ACTIVE
description :
----------------------------------------------
port : 80 address : 0.0.0.0 addr type : -
interval : 5 pass intvl : 2 pass count : 2
fail count: 3 recv timeout: 10
http method : GET
http url : /test
conn termination : GRACEFUL
expect offset : 0 , open timeout : 10
expect regex : trululu
send data : -
--------------------- probe results --------------------
probe association probed-address probes failed passed health
------------------- ---------------+----------+----------+----------+-------
real : R_xxx[0]
serverfarm: SF_xxx_TEST
10.xx.0.xx 39 39 0 FAILED
Socket state : CLOSED
No. Passed states : 0 No. Failed states : 1
No. Probes skipped : 0 Last status code : 0
No. Out of Sockets : 0 No. Internal error: 0
Last disconnect err : Received invalid status code
Last probe time : Fri Jan 11 09:37:58 2008
Last fail time : Fri Jan 11 09:36:40 2008
Last active time : Never
for de default tcp port, on the documentation there is a list that says the default tcp port used is 80, if I have a real listening to port 8080, and I try to put the probe either on the serverfarm or the real itself, I see tcp connection on the 80 port instead of the 8080 port. Strange, maybe os bug.
my default tcp probe is :
probe tcp P_TCP_DEFAULT
description probe defaut pour tcp
interval 5
passdetect interval 2
passdetect count 2
thanks for your help.
What is strange is that the http probe when I remove the expect status, the failed reason is still a invalid code and not "User defined Reg-Exp was not found in Host Response"
strange ;-) (I always have strange things with those Lb)
