cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
398
Views
0
Helpful
0
Replies
Highlighted
Beginner

ACI-Leaf to L3-OUT/Physical domain N7K connectivity

Hi,

I am in need of help for ACI Leaf to N7K connectivities;

Is below scenario possible;

 

For Tenant-A:

- Leaf101 port 1/31 Physical Domain is connected to N7K-Eth1/37(routed port with IP i.e.: 10.10.10.1/24)

-From N7k, I can successfully ping to 10.10.10.254/24(configured on Leaf101)

 

While above connection remain in place, Can I create another Additional below senerio?

For Tenant-A:

- Leaf101 port 1/31 L3-OUT-OSPF is connected to N7K-Eth1/37(routed port with IP i.e.: 10.10.10.1/24)

- Now I configure the OSPF on N7K and add the 10.10.10.0/24 in OSPF, so basically N7K-Eth1/37 is the OSPF interface now.

 

Question: 

1) As per above scenario, can same Leaf port be configured as Physical Domain and L3-OUT(for ospf) at the same time.

2) Can  Tenant-A, use the same Leaf port for physical domain and Tenant-B use the same Leaf for L3_OUT.

 

Your answer will help me clear the doubts.

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards
This widget could not be displayed.