Hi,
I am in need of help for ACI Leaf to N7K connectivities;
Is below scenario possible;
For Tenant-A:
- Leaf101 port 1/31 Physical Domain is connected to N7K-Eth1/37(routed port with IP i.e.: 10.10.10.1/24)
-From N7k, I can successfully ping to 10.10.10.254/24(configured on Leaf101)
While above connection remain in place, Can I create another Additional below senerio?
For Tenant-A:
- Leaf101 port 1/31 L3-OUT-OSPF is connected to N7K-Eth1/37(routed port with IP i.e.: 10.10.10.1/24)
- Now I configure the OSPF on N7K and add the 10.10.10.0/24 in OSPF, so basically N7K-Eth1/37 is the OSPF interface now.
Question:
1) As per above scenario, can same Leaf port be configured as Physical Domain and L3-OUT(for ospf) at the same time.
2) Can Tenant-A, use the same Leaf port for physical domain and Tenant-B use the same Leaf for L3_OUT.
Your answer will help me clear the doubts.
