07-28-2011 11:24 AM
Hello
We have an ACE 4710 Appliance with two user contexts. We are trying to get vservers statistics using SNMP, but the snmpwalk for the "slbVServerClassMap" is not showing us the complete list of class-map configured.
Each context has their own management IP address.
On context 1 we get the VServers table complete.
snmpwalk -v2c –c cisco123 10.248.8.42 enterprises.9.9.161.1.4.2.1.2
SNMPv2-SMI::enterprises.9.9.161.1.4.2.1.2.1.51 = STRING: "VIP_SALES-A"
SNMPv2-SMI::enterprises.9.9.161.1.4.2.1.2.1.52 = STRING: "VIP_SALES-A_SSL"
SNMPv2-SMI::enterprises.9.9.161.1.4.2.1.2.1.53 = STRING: "VIP_DEV-A"
SNMPv2-SMI::enterprises.9.9.161.1.4.2.1.2.1.54 = STRING: "VIP_DEV-A_SSL"
SNMPv2-SMI::enterprises.9.9.161.1.4.2.1.2.1.55 = STRING: "VIP_ITOP"
SNMPv2-SMI::enterprises.9.9.161.1.4.2.1.2.1.56 = STRING: "VIP_REDIRECT"
But in context 2 we're not getting any answer
snmpwalk -v2c –c cisco123 10.248.8.44 enterprises.9.9.161.1.4.2.1.2
SNMPv2-SMI::enterprises.9.9.161.1.4.2.1.2 = No Such Instance currently exists at this OID
System version is A3(2.6) and both contexts have the apropiated snmp configuration.
Thanks
Judith
07-29-2011 02:10 AM
Hi Judith,
I'm afraid you're hitting CSCtk57750. The bugfix will be available in A4(2.2)
cheers,
Fabrizio
07-29-2011 06:25 AM
Fabrizio,
We will update the ACE then.
Thanks for your advice.
Judith
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide