10-04-2012 11:04 PM
Hi,
Command to know how long the session from client is Active in ACE?
Regards,
Thiyagu
10-04-2012 11:10 PM
Hi Thiyagu,
Did you mean client login session to ACE module or client traffic to one of the server in server farm?
Regards
Najaf
10-05-2012 12:04 AM
Hi Najaf,
Thanks for your reply. I want to know about the client traffic to one of the server in teh server farm?
Regards,
Thiyagu
10-05-2012 10:12 AM
Hi,
Try this..Note sure if this will give the exact information which you are look for :-(
ACE_module5/Admin# show serverfarm SFARM1 detail
serverfarm : SFARM1, type: HOST
total rservers : 3
active rservers: 3
description : -
state : ACTIVE <------- Current state of the server farm
predictor : ROUNDROBIN <------- Load-balancing method
weight : -
autoadjust : MAXLOAD
failaction : -
back-inservice : 40
partial-threshold : 40
num times failover : 0
num times back inservice : 0
total conn-dropcount : 0 <------- Total number of connection attempts to this server farm that the ACE discarded
---------------------------------
----------connections-----------
real weight state current total failures
---+---------------------+------+------------+----------+----------+---------
rserver: SERVER1
192.168.252.245:0 10 INSERVICE 0 0 0 <------- Real server IP address, state, and connection statistics
max-conns : 4000000 , out-of-rotation count : 0
min-conns : 4000000
conn-rate-limit : - , out-of-rotation count : -
bandwidth-rate-limit : - , out-of-rotation count : -
retcode out-of-rotation count : -
load value : 0
rserver: SERVER2
192.168.252.246:0 20 INSERVICE 0 0 0
max-conns : 4000000 , out-of-rotation count : 0
min-conns : 4000000
conn-rate-limit : - , out-of-rotation count : -
bandwidth-rate-limit : - , out-of-rotation count : -
retcode out-of-rotation count : -
load value : 0
rserver: SERVER3
192.168.252.247:0 30 INSERVICE 0 0 0
max-conns : 4000000 , out-of-rotation count : 0
min-conns : 4000000
conn-rate-limit : - , out-of-rotation count : -
bandwidth-rate-limit : - , out-of-rotation count : -
retcode out-of-rotation count : -
load value : 0
Regards
Najaf
CCIE (R&S) 25070
10-05-2012 02:02 PM
Hello Thiyagu,
Perhaps you can try below which can give you the idle time and
elapsed time:
# show conn address
# show conn address
# show conn rserver
# show conn rserver
Or what exactly are you looking for?
Jorge
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: