Hello:
I have a CSS 11501 where I need to balance Telnet,I can´t get service up and running.
My client need telnet to server connected to a server farm. I adjunt config and Troubleshooting.
!*************************** GLOBAL ***************************
ip route 0.0.0.0 0.0.0.0 192.168.198.1 1
!************************* INTERFACE *************************
interface e7
bridge vlan 16
interface e8
bridge vlan 16
!************************** CIRCUIT **************************
circuit VLAN1
ip address 192.168.198.200 255.255.255.0
circuit VLAN16
ip address 10.10.10.1 255.255.255.0
!************************** SERVICE **************************
service serv1
description "Server for Telnet"
ip address 10.10.10.2
active
!*************************** OWNER ***************************
owner CSS
content Telnet
vip address 192.168.198.100
add service serv1
protocol tcp
port 23
active
CSS11050# sh ser
Services (2 entries):
Name: serv1 Index: 2
Type: Local State: Alive
Rule ( 10.10.10.2 ANY ANY )
Redirect Domain:
Redirect String:
Keepalive: (ICMP 5 3 5 )
Last Clearing of Stats Counters: 11/09/2004 05:20:12
Mtu: 1500 State Transitions: 6
Mtu: 1500 State Transitions: 6
Total Connections: 12 Total Reused Conns: 0
Weight: 1 Load: 2
DFP: Disable
CSS11050# sh summary
Global Bypass Counters:
No Rule Bypass Count: 0
Acl Bypass Count: 0
Owner Content Rules State Services Service Hits
CSS Telnet Active serv1 1
CSS11050# sh service summary
Service Name State Conn Weight Avg State Idx
Load Transitions
serv1 Alive 0 1 2 6 2
