10-13-2010 09:21 AM
Hi all,
I was trying to turn on the SNMP service on GSS appliance. I believe there are not so many CLIs I can use to turn it on. But the SNMP service on the device doesn't look like working for me.
Can anyone help me out of this? I am about to open a SR in TAC.
Thanks,
James
Device Information:
tns1.abcd.ca#sh ver
Global Site Selector (GSS)
Model Number: GSS-4492-k9
Copyright (c) 1999-2009 by Cisco Systems, Inc.
Version 3.1(0)
Uptime: 61 Days 1 Hours 48 Minutes and 35 seconds
tns1.abcd.ca#sh license installed
Licensed modules are
DDoS
tns1.abcd.ca#sh license active
Enabled modules are
DDoS
Runing configuration:
tns1.abcd.ca#sh run | grep snmp
snmp-server enable
snmp-server location Toronto
snmp-server contact TOR.fw.alert@abcd.com
snmp-server trap-source ethernet 1
tns1.abcd.ca#
Snmp status:
tns1.abcd.ca#sh snmp
snmp is enabled
Syslog:
tns1.abcd.ca#sh log |grep Snmp
Oct 12 15:41:26 tns1 SYS-6-SERVICES[1578] Enabling Snmp
Oct 12 15:41:27 tns1 SYS-6-SERVICES[1596] Starting Snmp
Oct 12 15:41:28 tns1 SYS-3-SERVICES[1624] Service Snmp is not running but should be.
Oct 12 15:51:35 tns1 SYS-6-SERVICES[2959] Disabling Snmp
Oct 12 15:51:36 tns1 SYS-6-SERVICES[3001] Stopping Snmp
Oct 12 15:52:26 tns1 SYS-6-SERVICES[3230] Enabling Snmp
Oct 12 15:52:26 tns1 SYS-6-SERVICES[3257] Starting Snmp
Oct 12 15:52:27 tns1 SYS-3-SERVICES[3297] Service Snmp is not running but should be.
Oct 12 16:12:59 tns1 SYS-6-SERVICES[5684] Disabling Snmp
Oct 12 16:13:00 tns1 SYS-6-SERVICES[5702] Stopping Snmp
Oct 12 16:13:44 tns1 SYS-6-SERVICES[5820] Enabling Snmp
Oct 12 16:13:45 tns1 SYS-6-SERVICES[5838] Starting Snmp
Oct 12 16:13:46 tns1 SYS-3-SERVICES[5864] Service Snmp is not running but should be.
Oct 12 16:14:50 tns1 SYS-6-SERVICES[6040] Disabling Snmp
Oct 12 16:14:51 tns1 SYS-6-SERVICES[6062] Stopping Snmp
Oct 12 16:15:15 tns1 SYS-6-SERVICES[6140] Enabling Snmp
Oct 12 16:15:15 tns1 SYS-6-SERVICES[6162] Starting Snmp
Oct 12 16:15:16 tns1 SYS-3-SERVICES[6190] Service Snmp is not running but should be.
Solved! Go to Solution.
10-14-2010 12:01 PM
Hi James.
This is a bug:
fixed in 3.1(1)
Regards,
Fadi.
10-14-2010 12:01 PM
Hi James.
This is a bug:
fixed in 3.1(1)
Regards,
Fadi.
10-15-2010 09:04 AM
OK, I have to upgrade the software on GSS see if it can get SNMP running fine.
James
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide