09-23-2010 06:46 AM
Here is the problem i am looking to resolve on my customer's network. Any idea on how to get the packet redirected to the three servers instead of to one server.
When we shutdown the node 1, we are getting: :Page can not be found. Therefore there is no redirection to nodes 2 & 3 as it should be if the load balancer was operating properly.
When we log in to any of the UAT nodes using the load balancer link (eagleuat.ops.tiaa-cref.ora) and then try to use any of the application sub links, we are again prompted for the password with the message that the connection was lost. If we connect directly (bypassing the load balancer) this doesn't happen.:
Here is the CSS config:
content x-eagleuat
vip address 10.x.x.x
add service PAGLE01
add service PAGLE02
add service PAGLE03
protocol tcp
port 8080
advanced-balance sticky-srcip
sticky-inact-timeout 30
balance leastconn
active
09-23-2010 07:43 AM
the reason seems that you have not configure the keepalive for the services correctly.
Here are the sample configuration on CSS:
service PAGLE01
port 8080
ip address 1.1.1.1
protocol tcp
keepalive tcp 8080
active
09-23-2010 08:02 AM
What does the keepalive command do?
I thought since there is a load balancer that is supposed to load balance traffic across the three servers the traffic should have been redirected to the other two servers when the first server was shutdown.
Let me know what you think
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide