10-05-2007 08:14 AM
I just received the ACE devices yesterday and have a simple question. Can the VIP and real servers be on the same IP subnet? And if they are does the default-gateway on the real server have to be set to the VIP ip address?
10-05-2007 08:22 AM
Yes vip and real servers can be on the same subnet . What you then should use is bridge mode and use the msfc interface as dg for your servers:
10-05-2007 09:03 AM
I could bridge the vlan but I need to share it accross context. A bridged can not be shared accross context. So how would I configure the ACE using a routed interface when the VIP and servers are on the same IP subnet.
10-12-2007 04:42 AM
you can do one-armed routed mode, but to ensure return traffic hits the ACE on the way from the rserver to the client you'll need to either use PBR on the mfsc or Source NAT in your ACE context.
marty
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide