11-21-2012 04:53 AM
Necessito de informações sobre quais parametros de configuração no ASA Version 8.2(2)12, e necessario para habilitar o trafego otimizado WAAS.
Obrigado.
Solved! Go to Solution.
11-21-2012 06:27 AM
Hi Jorge,
I'll answer in English if you don't mind.
By default, the ASA clears the WAAS TCP option.
To let it go through, you just need to apply inspect waas on the service-policy bound to the interfaces where WAAS traffic is coming.
I wrote a document some time ago that explain this:
https://supportforums.cisco.com/docs/DOC-15128#Solution_on_ASA_723_or_FWSM_321_and_after
Regards,
Nicolas
11-21-2012 06:27 AM
Hi Jorge,
I'll answer in English if you don't mind.
By default, the ASA clears the WAAS TCP option.
To let it go through, you just need to apply inspect waas on the service-policy bound to the interfaces where WAAS traffic is coming.
I wrote a document some time ago that explain this:
https://supportforums.cisco.com/docs/DOC-15128#Solution_on_ASA_723_or_FWSM_321_and_after
Regards,
Nicolas
11-23-2012 04:30 PM
Hi Nicolas,
This document has the information I need, thank you.
Regards,
Jorge
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: