04-23-2019 07:42 AM
Hello,
I need to know which ports I have to open in a firewall to register Waas ( in wccp) in Central Manager. I have seen that I only need to open TCP 443 port. Is it correct?.
Thank you for your help and support.
Regards.
Solved! Go to Solution.
04-24-2019 03:50 AM
Hi,
This is correct, check this out : https://community.cisco.com/t5/application-networking/what-ports-need-to-be-open-on-fw-for-waas-communication-urgent/td-p/2427248
However WCCP is not being used from/to Central Manager !
WCCP is being used locally for redirection, and will probably not go through a firewall ?
Otherwise you'll need to open for the WCCP establishment (UDP port 2048) plus (dependant upon redirection/return method) optionally GRE.
Best Regards
Finn
04-24-2019 03:50 AM
Hi,
This is correct, check this out : https://community.cisco.com/t5/application-networking/what-ports-need-to-be-open-on-fw-for-waas-communication-urgent/td-p/2427248
However WCCP is not being used from/to Central Manager !
WCCP is being used locally for redirection, and will probably not go through a firewall ?
Otherwise you'll need to open for the WCCP establishment (UDP port 2048) plus (dependant upon redirection/return method) optionally GRE.
Best Regards
Finn
04-24-2019 04:03 AM
Hi,
WCCP is used locally.
Thank you for your help!!.
Regards.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide