Time on ANM Server

[John Ruhl]

I recently installed the ANM Serer as a virtual appliance running on version 4.1.  According to the CLI of the appliance, my clock is correct for my time zone.  However, the clock on the GUI shows me the time is several hours ahead and not the actual time zone that the server is configured for? 

Below is the text from the CLI and I have attached a picture of the time shown in the ANM GUI.

BOSINFPRDANM001/admin# sh run | in timezone

clock timezone US/Eastern

BOSINFPRDANM001/admin# sh clock

Mon Jan 10 14:07:59 EST 2011

BOSINFPRDANM001/admin#

Does anyone have any idea why they should be different?

[kitanaka · Accepted solution]

Hi, John

It might be a known issue CSCsx13875.

Software Version A3(2.2)  Resolved Caveats

http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/ace_appliances/vA3_x/release/note/RACEA3X.html#wp456393

The clock only appears in GMT in DM/ANM GUI irrespective time zone configured on ACE appliance.

After the fix of CSCsx13875, a string 'GMT' will be added next to the time on the GUI status bar.

Your clock in GUI approximately ahead 5 hours that matches to "EST = GMT -5h".

Regards,

Kim.

[John Ruhl]

Thanks Kim!