uBR10000 slot and subslots numbers concepts ?

[zillah2004]

Dear Experts

Tried to search as below but couldn't find what i am looking for

https://www.google.com.au/search?q=Cisco+uBR10000+slots+/subslots+numbers&ei=YR9NW7PiMdLt0ATCqILgAw&start=10&sa=N&biw=1351&bih=594

I want to understand how uBR10000 slots numbers convention

https://imgur.com/a/LwzPC2B

https://imgur.com/a/ZP2mj8p

https://imgur.com/a/ItRdQVT

Attached photos showing we slots numbers start from 1 up to 8 ( right to left ) ,,,,we are supposed to call them slots ,,,,arn't we ?if so no drama

Third link showing "SUBSLOT 0" and "SUBSLOT 1" I would assume those are for 3 cards that were installed in slot 1 and slot 2 and slot 3 ,,,,is my assumption right ?

What are those numbers in the link below ?

https://imgur.com/a/ITMp2g6

How the naming convention would be ? Is it Slot /subslot /port number ???or something else ?

Thanks

[sbhadrav@cisco.com]

slot —Slot where the cable interface line card resides.
    subslot —(Cisco uBR10012 only) Secondary slot number of the cable interface line card.
    controller —Controller index for the modular cable.
Means we have slot number which are from 1 to 8 in the picture that I posted

Refer the link below:-
https://www.cisco.com/c/en/us/td/docs/interfaces_modules/cable/broadband_processing_engines/ubr_mc3gx60v/configuration/guide/mc3g60_cfg.html#22794