08-17-2009 08:43 AM
I had a data center that had 2 WAE's running 4.0.1c and a single edge WAE running 4.1.3a. Everything ran fine. I upgraded the WAE's at the core to 4.1.3a this weekend and now the edge WAE that was already running 4.1.3a will not peer. WCCP is established locally. The core WAE's in the data center are peering with WAE's in another data center just fine. I am getting ZERO TFO connections on that edge WAE.
08-17-2009 10:18 AM
Patrick,
What are the auto-discovery failure or pass-through reasons you see on the edge WAE?
Regards,
Zach
08-17-2009 10:32 AM
I found my WCCP had locked up on my 3750 switch. It showed the WAE connected when I did a "show ip wccp" but it also showed connected after disabling WCCP on the WAE. All is good now after resetting WCCP.
Thanks for the quick reponse though.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide