using the same class-map for different VIPs

[axfalk]

We're running ACE SM 5.3(1) and I was wondering if the ACE would allow associating multiple VIPs with the same class-map?

Thanks.

_ Greg

[thiland]

That is possible, assuming you're talking about something like this:

class-map match-any CLASS-VIP-APPLICATION1
  2 match virtual-address 10.10.10.10 tcp eq 80
  3 match virtual-address 10.10.10.10 tcp eq 8080

[axfalk]

Thanks for your response. What I had in mind is more like this:

class-map match-any CLASS-VIP-APPLICATION1
  2 match virtual-address 10.10.10.20 tcp eq 80
  3 match virtual-address 10.10.10.10 tcp eq 80

Thanks again.

[Kanwaljeet Singh]

Hi Greg,

Yes you can. You can also define a range:

switch/Admin(config-cmap)# 2 match virtual-address 10.1.1.1 ?
  <1-255>    Ip protocol number
  <A.B.C.D>  Specify virtual ip-address mask to use for a range of VIPs

Regards,

Kanwal

Note: Please mark answers if they are helpful.

[axfalk1]

thanks much.