cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
791
Views
0
Helpful
1
Replies
Highlighted
Beginner

WAAS Inline Network Adapter Required for 674 Appliance Inline Mode?

Is an Inline Network Adpater required to setup a WAAS 674 Appliance in Inline Interception Mode or can the two inbuilt interfaces Gi1/0 anf Gi2/0 be used?

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Cisco Employee

Hi,

You definitely need an Inline Adapter to setup WAAS 674 for inline interception mode. The built in Gig interfaces cannot be used for inline interception but can be used for WCCP or PBR. Inline adapter comes in a group LAN port and a WAN port.

Regards

Kiran.

View solution in original post

1 REPLY 1
Highlighted
Cisco Employee

Hi,

You definitely need an Inline Adapter to setup WAAS 674 for inline interception mode. The built in Gig interfaces cannot be used for inline interception but can be used for WCCP or PBR. Inline adapter comes in a group LAN port and a WAN port.

Regards

Kiran.

View solution in original post

Content for Community-Ad
This widget could not be displayed.