cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1286
Views
0
Helpful
1
Replies

waas: problems with peers identification

maksimov_o
Level 1
Level 1

good days all.

we have got a problems with peers' identification in waas solution.

topology: 1 central-manager and 2 nme-502, both nme located in different location and subnets, and both see each other (pings are available from nme to nme). Version of solution 4.1.3b

But one device on the central-manager page in point "TFO Peer List Reported ByDevice" show ip for distant device, but distant device in the same point shows "There are currently no Peers to display".

And no any optimization actions

All troubleshooting methodology and guidances are useless....

with hope to help, thanks

1 Reply 1

Zach Seils
Level 7
Level 7

Let's start by making sure that interception and redirection are working properly.  You can start with the troubleshooting guide here:

http://docwiki.cisco.com/wiki/Cisco_WAAS_Troubleshooting_Guide_for_Release_4.1.3_and_Later_--_Troubleshooting_WCCP

Regards,

Zach

Review Cisco Networking for a $25 gift card