cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
AMA event- Migrating Existing Networks to Cisco ACI
657
Views
5
Helpful
5
Replies
Highlighted
Beginner

wafs_roles_change Major Alarm on WAVE 574

Hi,

i am receiving a wafs_roles_change major alarm on WAVE 574 device as shown below. In fact i had disabled n enabled cifs accelerator once and since then i am receving this alarm. However now cifs accelerator shows enabled and running as mentioned below.

Please let me know how to get ride of this alarm!!

WAVE#sh alarms

Critical Alarms:
----------------
None

Major Alarms:
-------------
     Alarm ID             Module/Submodule     Instance
     -------------------- -------------------- --------------------
   1 wafs_roles_change    wafs

Minor Alarms:
-------------
None

WAVE#

WAVE#sh accelerator

Accelerator     Licensed        Config State    Operational State
-----------     --------        ------------    -----------------
cifs            Yes             Enabled         Running
epm             Yes             Enabled         Running
http            Yes             Enabled         Running
mapi            Yes             Enabled         Running
nfs             Yes             Enabled         Running
video           No              Enabled         Shutdown
wafs-core       Yes             Disabled        Shutdown
wafs-edge       Yes             Disabled        Shutdown
WAVE#

Thanks,

Uday

Everyone's tags (2)
1 ACCEPTED SOLUTION

Accepted Solutions
Beginner

Re: wafs_roles_change Major Alarm on WAVE 574

Hi Uday,

This is more of a cosmetic bug, you can ignore the same and once you upgrade the version this will be gone. Even reload can set this alarm right.

Hope this helps.

Regards.

Abijth

PS: Please mark this ans Answered, if this answers your question.

View solution in original post

5 REPLIES 5
Cisco Employee

Re: wafs_roles_change Major Alarm on WAVE 574

Hi Uday,

Did you had WAFS enabled before moving to CIFSAO on this device?

If so, this is normal as this alarm is triggered when you move from WAFS to CIFS AO.

To clear it, you just need to restart your WAE as described as last step of migration from WAFS to CIFSAO: http://www.cisco.com/en/US/partner/docs/app_ntwk_services/waas/waas/v417/configuration/guide/filesvr.html#wp1140094


Regards,

Nicolas

Beginner

Re: wafs_roles_change Major Alarm on WAVE 574

Hi Uday,

This is a very minor bug , let me know the version of waas you are running. There is no need to worry as this will not impact any of your waas functionality.

Do let me know if you need more help on this. A reload will help, this bug appears when you disable and enable CIFS AO. Please upgrade to 4.2.3c, i guess you are running a older code.

Regards

Abijith Sharma V S

asharmav@cisco.com

Beginner

Re: wafs_roles_change Major Alarm on WAVE 574

Hi Abijit,

Thanks your reply!!

In fact i was going thru one of the cisco docus on net and found same answer what you have advised. I am using WAAS version 4.1.1c and the issue has started after disabling and enabling CIFS AO as you mentioned. I also reloaded the box immediately after receiving this alarm but still no luck

I may not go for changing the version now, however I m going to try reloading the box once again and will update you on the status.

Thanks,

Uday

Beginner

Re: wafs_roles_change Major Alarm on WAVE 574

Hi Uday,

This is more of a cosmetic bug, you can ignore the same and once you upgrade the version this will be gone. Even reload can set this alarm right.

Hope this helps.

Regards.

Abijth

PS: Please mark this ans Answered, if this answers your question.

View solution in original post

Beginner

Re: wafs_roles_change Major Alarm on WAVE 574

Hi Abijth and Nicolas,

Thanks for your help!! Issue is been fixed now after reloading the box second time.

Thanks once again,

Uday

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards
This widget could not be displayed.