Last time I ungraded the C3650 switch to meet the wccp requirement . I configured wccp in c3650 switch and also configured vlan301 as source interface. When I checked the result in WSA, no traffic seen and no browsing on test laptop but I can ping the public DNS.
Can someone help me what is missing?
Here's the config on my switch
ip access-list extended TEST_VLAN301 deny ip any 10.0.0.0 0.255.255.255 deny ip any 172.16.0.0 0.15.255.255 permit tcp 10.100.2.0 0.0.0.255 any eq www permit tcp 10.100.2.0 0.0.0.255 any eq 443
ip wccp source-interface Vlan301 ip wccp web-cache redirect-list TEST_VLAN301 ip wccp 90 redirect-list TEST_VLAN301 ip wccp 94 redirect-list TEST_VLAN301
interface Vlan301 description Test_VLAN ip address 10.100.2.1 255.255.255.0 ip wccp web-cache redirect in ip wccp 90 redirect in ip wccp 94 redirect in
To participate in this event, please use the button to ask your questions
This special event - formerly known as Ask the Expert- is open only to Cisco Customers and Partners.
Many pages in the Cisco Community are acce...
About this webinar
Cisco Application Centric Infrastructure (ACI) is designed API first, making it an automator’s, developer’s and programmer’s dream. When every aspect of a product is available via an API, there is no limit to the scale, robustnes...
Community Live - Application Centric Infrastructure: Introduction and Configuration Best Practices
This special event - formerly known as webcast- is open only to Cisco Customers and Partners.
Many pages in the Cisco Community are accessible o...