Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about different solutions and best practices around securing your physical and virtual environment in the Data Center with Cisco expert Naman Latif.
Naman Latif is a network consulting engineer in the Advanced Services organization at Cisco. He currently focuses on Cisco's security portfolio for data centers including secure data design in both single and multi-tenant environments, virtualization, and security technologies. His other areas of expertise include physical and virtual appliances, routing and switching, and data centers. He holds a bachelor's degree in electrical engineering from UET, Lahore in Pakistan. He also holds CCIE certification in Security (#15951) as well as Cisco WWSP Specialist and VCP (VMware) certifications.
Remember to use the rating system to let Naman know if you have received an adequate response to your technical support question.
Naman might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the Data Center sub-community discussion forum shortly after the event. This event lasts through December 21, 2012. Visit this support forum often to view responses to your questions and the questions of other Cisco Support Community members.
On my cisco nexus switches i keep seeing this in the Debug for BGP.
Peer has pending data on socket during recv, extending expiry timer.
The information on the internet for this message is sparse at best. Does anyone have any idea what...
We have a OTV environment ASR 1000 where my Host/laptop NIC has to set to MTU 1458-bytes then only it will work, i.e
1. PING with more 1500-bytes (the maximum size is 1472)
2. Transfer large file size (1Gb file is within 20sec)
We have se...
I have a problem with +500byte ICMP packet, I am pinging from end-points residing outside ACI arriving in two different L3OUT.The ping suceed but in the pcap caputer from the APIC I see the followingTotal Length: 528 - [Expert Info (Error/Proto...
I need info concerning how to wire a dc cable for ASR9000 V-2, dc power shelf . I need a photo of the DC DSUB 2 POLE CONNECTOR our any other info as to make clear where the - 48VDc wire is connected at the panel connector . At the ...