Welcome to the Cisco Support Community Ask the Expert conversation.This is an opportunity to learn and ask questions of Cisco expert Vignesh R. P. about the Cisco® Nexus 7000 Series Switches and support for the Cisco NX-OS Software platform .
The Cisco® Nexus 7000 Series Switches introduce support for the Cisco NX-OS Software platform, a new class of operating system designed for data centers. Based on the Cisco MDS 9000 SAN-OS platform, Cisco NX-OS introduces support for virtual device contexts (VDCs), which allows the switches to be virtualized at the device level. Each configured VDC presents itself as a unique device to connected users within the framework of that physical switch. The VDC runs as a separate logical entity within the switch, maintaining its own unique set of running software processes, having its own configuration, and being managed by a separate administrator.
Vignesh R. P. is a customer support engineer in the Cisco High Touch Technical Support center in Bangalore, India, supporting Cisco's major service provider customers in routing and MPLS technologies. His areas of expertise include routing, switching, and MPLS. Previously at Cisco he worked as a network consulting engineer for enterprise customers. He has been in the networking industry for 8 years and holds CCIE certification in the Routing & Switching and Service Provider tracks.
Remember to use the rating system to let Vignesh know if you have received an adequate response.
Vignesh might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the Data Center sub-community discussion forum shortly after the event. This event lasts through through January 18, 2013. Visit this forum often to view responses to your questions and the questions of other community members.
I need info concerning how to wire a dc cable for ASR9000 V-2, dc power shelf . I need a photo of the DC DSUB 2 POLE CONNECTOR our any other info as to make clear where the - 48VDc wire is connected at the panel connector . At the ...
This is about VMware ESX (.ova) based deployment with 3 Data Nodes and 3 App Nodes. Nexus Dashboard v2.1(2d), Fabric Controller v12.0.2f.
I am trying to upgrade image using Nexus Dashboard Fabric Controller but it keeps failing with below erro...
Nexus 93180YC-FX3 switches contain an "GNSS" LED at their front
* which is not part of the documentation (hardware installation guide for example)
Since "feature frequency-synchronization" has to be licensed (DCN SyncE Add-On License)* GNSS seems t...