This topic is a chance to discuss more about the most common issues within the different Catalyst 9000 models and the best practices to troubleshoot them. The session includes tips and best practices on how to react when an issue appears, what information should be collected, and what actions should be taken to recover from such scenarios.
Ask questions from Tuesday 25 to Friday 28th of June, 2019
Adan Acosta is a Technical Consulting Engineer on the Enterprise Routing & Switching team at the Customer Experience (CX) Center. He has worked in different areas related to network design for seven years, such as pre-sales, post sales, and technical support on Wireless, Routing & Switching, and Security technologies. Adan holds a bachelor’s degree in electronics and communication from the ESIME Zacatenco in Mexico. He holds a CCNA in R&S and Security.
Aaron Cespedes is a Technical Consulting Engineer on the Enterprise Routing & Switching team at the Customer Experience (CX) Center. He has worked with different Cisco technologies for six years, including backbone, and specializes in Switching technologies. Aaron holds a bachelor’s degree in telecommunications from the Universidad Politecnica of Costa Rica. He holds a CCNP and a CCNP in R&S certifications. He is currently pursuing a CCIE in R&S.
Adan & Aaron might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the Switching category.
AutoCAD originally became striking since it was the primary CAD program created for PC use (rather than modern PCs) during the 1980s. AutoCAD specialists, with information or degree in mechanical designing, can work across different passage levels to...
Hello, I have 2 point to point leased data circuits between two offices. These 2 links are connected to Cisco 3845 and Cisco 2811 routers WIC-2T card serial ports in both the offices. Static routing is used between these two sites and Multilink with ...
I have an SD-WAN router C1111-8P. I'm unable to enter the global configuration mode with this router.With C1121-8P I can enter global configuration mode by enabling the autonomous mode.Is there a similar process in C1111 router?
Hi everyone , does anyone knows how to restart the "Reports" service on DNA , I'm having some issues generating Reports, it's a little slow and I'm getting errors. Also, does anyone knows how to restart a 3 node cluster ? I would like to restart the ...