Please join us for a live webinar with ESG Research analysts and Cisco subject matter experts to discuss the growing demand to accelerate the business’ access to data by modernizing the SAN.
As businesses rely more on their data, increased pressure is placed on IT organization and the underlying infrastructure to accelerate the business’ access to data. This increased pressure makes modernizing the SAN a key priority for many IT organizations, and Cisco can help. In this webinar, we will discuss Ethernet and Fiber Channel networks, and compelling innovations to modernize SAN fabric with no disruption. You’ll also learn how to maximize the value of the existing infrastructure assets.
Be a part of the discussion with ESG analysts and Cisco subject matter experts at this real-time roundtable on key innovations to modernize your storage network.
In this webinar, you’ll learn about: • Investment protection for your SAN • Deep visibility with built-in hardware-based analytics • IT Automation to reduce OPEX with DevOps tools • Cisco SAN Analytics live demo
I have two primary windows domain controllers with separate ip addresses. I would like one to act as a primary DNS and the other secondary. How do i get my cisco router to dynamically assign the the two windows DNS server ip addresses to all clients withi...
Good day,I have a windows domain controller that has the DHCP role installed. The DHCP role issues out IP addresses,. I would now like like the cisco router to issue out IP addresses to clients within my domain. What is the process of setting this up ?Rou...
Hey, I need a bit of help. I need to set up a remote access port forward to a machine existing in a vrf. Because it's in a vrf I cannot use the interface command, I can only specify the wan IP. I have no option for a static IP so i ne...
Hello Team, We are configuring dot1x on ASR1001-x, the configuration is detailed below: Router(config)# dot1x system-auth-control
Router(config)# aaa new-model
Router(config)# aaa authentication dot1x default group radius
Currently have a nm-4g, 4 port sfp card installed in my C9300-24P, using g1/1 as my trunk uplink. I have the need for my fiber trunks leaving the switch than the nm-4g card can accommodate and have purchased the nm-8x, 8 port SFP card. This is...