cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Customer view - OnPlus Scanner Beta Instructions

173
Views
0
Helpful
0
Comments

STEP 1:

Navigate to www.onplusbeta.com and login with your cisco.com username and password:

Login-Register.png

STEP 2:

Enter your Account Type: Cisco Customer

Enter your contact detail (email)

Accept the Terms and Conditions:

Register.png

STEP 3:

Allow Java to run, in order to load the OnPlus Scanner:

Allow Java.png

STEP 4:

Scan for network devices in your network, by providing a single IP address or an IP address range and up to 3 device credentials at  a time. Please refer to the Help Menu (right above the IP Address Range) for details on various OnPlus Scanner options:

4 - Scan for Devices.png

STEP 5:

Click "Scan" button to scan for devices on your network:

5 - Scan in Process.png

STEP 6:

(OPTIONAL) You can choose to rescan the devices that failed authentication or unreachable by providing additional device credentials:

6 - Devices Failed.png

STEP 7:

Once done scanning for devices, click "Finished" to be taken to the list of your inventory that OnPlus Scanner has discovered:

7- List of Devices.png

NOTE: Please refer to STEP 9 to learn how to tune various options available on this page.

STEP 8:

Click through some of the top level menus to view the status of your devices -

'End of Life' will show EoL milestoone information pertaining to the devices scanned

'Advisories' will show any Security Advisories that are relevant to the devices found

'Warranties' shows the current state of the Warranty associated with all your devices

'Contracts' menu will show all devices and their asocaited contracts

9 - Some top level.png

Here is an example od the Hardware End of Life Information that OnPlus Scanner automatically provided for the list of the discovered devices:

9 - Hardware EOL.png

You can export this information into a .CSV file using the 'Export to CSV' button on the right hand side

STEP 9:

(OPTIONAL) Let's take a look at some of the options available on this page:

1. Customize the columns in the dashboard view, so you can see teh most relevant information to you;

2. You can Export the list of your inventory in .CSV file using the

3. You can click "Scan My Network" to scan additional devices or subnets.

8 - Options.png

4. You can assign "Labels" to a single device or to a group of devices, therefore creating logical groups of devices:

8 - Labels.png

    To create a Label, click on the Settings Wheel, then on "Create a Label":

8 - Create labels.png

   Click on "+" to add a label, give it a name, and click "Add":

8 - Label Name.png

   Once labels are created, you can assign them to the device(s) in your inventory, by selecting the devices, and clicking on the "i+" button:

8 - i+.png

   Choose the label you want to assign to the group of selected devices:

8 - Assign Labels.png

   Click "OK". You Label column now reflects the Labels you've assigned to the devices:

8 -  Result.png

You can also view a topology view of those labels through the topology view

STEP 10:

Please let us know your thoughts and suggestions on how we can improve OnPlus Scanner by providing your feedback via:

1. Feedback alias: rsvp-uabu@external.cisco.com

2. Feedback button located at the bottom of each OnPlus Scanner screen

10 - Feedback.png

Thank you,

Cisco OnPlus Scanner Team

CreatePlease to create content
This widget could not be displayed.