cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
60
Views
0
Helpful
1
Replies

Protocol bindings a royal pain now

Brian Bergin
Enthusiast
Enthusiast

In v1/v2 we had the ability to do protocol bindings for both WAN ports on the same screen. Now to change something you have to jump around screens.  This is definitely not an improvement in the GUI.  Again, I strongly urge you to go back and look at the very simple, elegant, and wonderfully fast GUI of the v1/v2 product and ensure that everything that's simple in the old units remains as simple in the new ones.  I can tell you that besides the look-feel change, it takes much longer to setup the v3 unit than it ever did in the v1/v2 unit.  IMHO, Cisco's latest GUIs from this one to the SA500 to the ESW500s are very poorly designed and create far too much click, click, click to do the same thing one could do with a single click previously.

1 REPLY 1

Te-Kai Liu
Rising star
Rising star

>In v1/v2 we had the ability to do protocol bindings for both WAN ports on the same screen.

Thanks for your feedback, the issue will be fixed in the next firmware.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: