cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
445
Views
0
Helpful
1
Replies
Highlighted
Beginner

RV345 Issue with Port forwarding and Apply changes

RV345 Version 1.0.03.16

Hi, I have two issues with this router,

First, I add the port forward rule as follow:

Enable ---External Service---- Internal Service---- Internal IP------- Interface

Yes...........RDP..........................RDP...........................192.168.1.40........WAN1

then I add two rules in Access Rules:

Priority --- Enable ----Action----Service ---Source Interface---Source---------Destination------Schedule

1................  Yes............Denied......RDP............WAN1.....................ANY......................ANY..................... ANYTIME

2................  Yes............Allowed.... RDP............WAN1.....................X.X.X.X (our-IP)....192.168.1.40...... ANYTIME

when I check if the port is open or close it shows 3389 is close but I can not connect by Remote Desktop.

The second issue is when I do some change and click on the APPLY button all connected computers to this router get the following popup message:

Connection Closed. The network connection was closed unexpectedly. 

Please advise what are the issues. Thanks

1 REPLY 1
Highlighted
Beginner

Hi all,

found the problem for the first issue, need to define Allowed rules prior to Denied rule.

CreatePlease to create content
This widget could not be displayed.