Community Live- All Things LTE…4G, 5G and Whatever’s Next
(Live event - formerly known as Webcast- Tuesday 10 November, 2020 at 10 am Pacific/ 1 pm Eastern / 7 pm Paris)
This event had place on Tuesday 10h, November 2020 at 10hrs PDT
This session spend time going over the current LTE market space from the consumption side of the equation. It covers Cisco’s current 4G LTE client offerings from the Enterprise BU as well as discuss general plans for moving into the 5G market space. As a prelude to that it covers some differentiating factors of the 5G and WiFI6 use cases.
Fundamentals of 4G and 5G technologies
5G versus WiFi6
Current and future LTE hardware offerings from Enterprise BU
David Roten is a Technical Marketing engineer with Cisco’s Enterprise Routing BU team. For the past 7 years, David has been in his current TME role with the Enterprise BU. During this time he has spoken at several Cisco Live events along with training and customer events globally. Prior to that, he spent a number of years working as a dev-test engineer covering the SIP-600, SIP-400, and SIP-200 linecards on the 7600 platform.
I am not able to join computers with static IP to SSID anymore using PSK. Everything was working fine until I ran into a power outage and WLCs restarted. When I try to join I am getting cannot connect to the network. When I looked at the logs it says:03.9...
HiI have a 5520 WLC with a defective HD in need of replacement. Since these are end of life I can get a new intel drive but I cannot find any information on the installation of the system have the AIR-CT5520-K9-8-10-162-0.aes code but do I ...
We have embeded 9115 EWC and we have enabled AD authentication. If the AD server shuts down and doesn't power up before WLC AD, when the users tries to connect there will be an error "Authentication server unavailable" and our IOS software version is 17.3...
Is it possible to add a wireless guest user via Powershell? I have a windows server 2012 R2 and I want to add a guest user to it.I've already added users using GUI, but now I want to do it through PowerShell.