cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
836
Views
0
Helpful
2
Replies
Highlighted

CID Problem with SPA8800

Hello.

I'm from Paraguay and I need assistance with SPA8800 voip gateway.

My problem is I don't recieve CID

I am sure that the PSTN line send the CID of the caller.

The SPA is conected  through SIP tunk to a asterisk server.

This is the log of the SPA

Jan  4 11:41:42 10.32.1.13 M1:

Jan  4 11:42:37 10.32.1.13 M1: [1]->10.32.1.12:5060(976)

Jan  4 11:42:37 10.32.1.13 M1: [1]->10.32.1.12:5060(976)

a=sendrecv 0-15lephone-event/800096 97 98 100 101TIONS, REFER

Jan  4 11:42:37 10.32.1.13 M1:

Jan  4 11:42:37 10.32.1.13 M1:

Jan  4 11:42:37 10.32.1.13 M1: [1]<<10.32.1.10:5060(439)

Jan  4 11:42:37 10.32.1.13 M1: [1]<<10.32.1.10:5060(439)

Content-Length: 00@10.32.1.10:5060>, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISHt=5161

Jan  4 11:42:37 10.32.1.13 M1:

Jan  4 11:42:37 10.32.1.13 M1:

Jan  4 11:42:37 10.32.1.13 M1: [1]<<10.32.1.10:5060(682)

Jan  4 11:42:37 10.32.1.13 M1: [1]<<10.32.1.10:5060(682)

a=sendrecv PCMA/8000P 0 88 IN IP4 10.32.1.10FER, SUBSCRIBE, NOTIFY, INFO, PUBLISHt=5161

Jan  4 11:42:37 10.32.1.13 M1:

Jan  4 11:42:37 10.32.1.13 M1:

Jan  4 11:42:37 10.32.1.13 M1: [1]->10.32.1.10:5060(347)

Jan  4 11:42:37 10.32.1.13 M1: [1]->10.32.1.10:5060(347)

Content-Length: 0/SPA8800-6.1.7(GW)1.20875o14bK-970797a5IP/2.0

Jan  4 11:42:37 10.32.1.13 M1:

Jan  4 11:42:37 10.32.1.13 M1:

Jan  4 11:42:41 10.32.1.13 M1: [1]->10.32.1.10:5060(315)

Jan  4 11:42:41 10.32.1.13 M1: [1]->10.32.1.10:5060(315)

Content-Length: 0/SPA8800-6.1.7(GW)1.20875o14bK-a56ebb83IP/2.0

Jan  4 11:42:41 10.32.1.13 M1:

Jan  4 11:42:41 10.32.1.13 M1:

Jan  4 11:42:41 10.32.1.13 M1: [1]<<10.32.1.10:5060(410)

Jan  4 11:42:41 10.32.1.13 M1: [1]<<10.32.1.10:5060(410)

Content-Length: 0es, timer, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISHt=5161

Jan  4 11:42:41 10.32.1.13 M1:

Max

2 REPLIES 2
Highlighted
Cisco Employee

Hola Maximo;

This forum is for SPA9000. I suggest you move the question to the ATA forum which is the appropriate one.

Regards;

Alberto

Highlighted

Thanks Alberto.

Can anybody help me with this problem?