Cisco SPA112 provisioning problem: FXS_Port_Power_Limit

[alejandro37v]

Hi,

We have problems provisioning specific parameter in a SPA112: FXS_Port_Power_Limit. Here is a part of our XML:

<Force_G729a_Code ua="na">*02729</Force_G729a_Code>

<FXS_Port_Power_Limit ua="na">4</FXS_Port_Power_Limit>

<FXS_Port_Input_Gain ua="na">+2</FXS_Port_Input_Gain>

<FXS_Port_Output_Gain ua="na">+2</FXS_Port_Output_Gain>

The parameter "FXS_Port_Power_Limit" is not provisioning the XML parameter (in the example: 4). It keeps the default value (3). Other parameters in the same section like FXS_Port_Input_Gain and FXS_Port_Output_Gain gets the XML value correctly.

Thanks for your advice,

Alejandro.

[nseto]

I looked at the spc file for this model and don't see that parameter.

http://software.cisco.com/download/release.html?mdfid=283998771&softwareid=282562500&release=1.3.1&relind=AVAILABLE&rellifecycle=&reltype=latest