Cisco SPA232D ATA and the Cisco SPA302D Wireless handset

[Justin Pascal]

Can I register handset SPA302D without SPA232D ATA via SIP? I will be using Asterisk, and we have a separate FXS/FXO gateway.

Thanks

[Leo Laohoo]

I will be using Asterisk, and we have a separate FXS/FXO gateway.

You will need a TDM400 FXO/FXS PCI/PCI Express card.

Can I register handset SPA302D without SPA232D ATA via SIP?

If you can configure the SPA302D with the authentication name, password and codec, then you can get away with direct registration to Asterisk.

Currently, I have an Asterisk/FreePBX on a Raspberry Pi.  I have a 7960G, 7970G and an SPA122 (with two analogue phones) registering to my setup. 

[Patrick Born]

Hi Justin,

No. The SPA302D is a DECT handset and the SPA232D is the DECT base station [and FXS/FXO gateway] so the SPA232D is required for any/all SPA302D deployments.

The SPA232D will register to your SIP proxy, not the SPA302D.

Regards,

Patrick---