10-30-2013 04:54 PM - edited 03-21-2019 10:10 AM
Hi,
I have a few SPA 8000 and SPA112 TA's, and everything's OK, until I tried to transfer a call from one of this analog lines, it doesn't work.
For what I've saw on some info on the web, it's about configuration, but doesn't seems to work.
I'm located in Europe, and for example, in SPA8000, under regional settings/control timer values, I have:
Hook Flash Timer Min: 0.8
Hook Flash Timer Max: 1.2
How could I solve this?
The phones are several gigaset analog phones, desk or handset's.
Thanks in advanced,
Jorge Bastos,
10-30-2013 07:44 PM
10-31-2013 02:17 AM
Thanks, done!
Is it possible to help now?
10-31-2013 10:51 AM
Hi, this is my working configuration:
Line Menu
Regional Menu
SIP Menu
Regards.
11-01-2013 03:44 AM
Hi,
Thanks for the answer.
With this, when I press the "R" key (tried with 3 different desk phones), the call hangs up.
Any idea?
11-01-2013 05:31 AM
Enable syslog and post debug.
Thanks.
11-01-2013 07:01 AM
Hi,
Check:
I just answered the call, and pressed the "R" key and the call dropped, and got a new line signal.
Nov 1 06:58:33 SPA112 kern.warning [17191644.012000] In cordless Driver Codec 0 and str PCMU/8000 chan 0
Nov 1 06:58:33 SPA112 kern.warning [17191644.012000] In cordless Driver Codec 111 and str G726-32/8000 chan 0
Nov 1 06:58:33 SPA112 kern.warning [17191644.012000] In cordless Driver Codec 8 and str PCMA/8000 chan 0
Nov 1 06:58:33 SPA112 kern.warning [17191644.012000] In cordless Driver Codec 100 and str NSE/8000 chan 0
Nov 1 06:58:33 SPA112 kern.warning [17191644.012000] In cordless Driver Codec 112 and str encaprtp/8000 chan 0
Nov 1 06:58:33 SPA112 kern.warning [17191644.012000] In cordless Driver Codec 255 and str chan 0
Nov 1 06:58:34 SPA112 kern.warning [17191645.040000]
Nov 1 06:58:34 SPA112 kern.warning [17191645.040000] #### RTP STOP Flag set in this channel break ####
Nov 1 06:58:34 SPA112 kern.warning [17191645.044000] ###### sock_sendmsg return 172
Nov 1 06:58:34 SPA112 kern.warning [17191645.048000] In cordless Driver Codec 0 and str PCMU/8000 chan 0
Nov 1 06:58:34 SPA112 kern.warning [17191645.048000] In cordless Driver Codec 8 and str PCMA/8000 chan 0
Nov 1 06:58:34 SPA112 kern.warning [17191645.048000] In cordless Driver Codec 100 and str NSE/8000 chan 0
Nov 1 06:58:34 SPA112 kern.warning [17191645.048000] In cordless Driver Codec 112 and str encaprtp/8000 chan 0
Nov 1 06:58:34 SPA112 kern.warning [17191645.048000] In cordless Driver Codec 255 and str chan 0
Nov 1 06:58:34 SPA112 kern.warning [17191645.048000] In cordless Driver Codec 255 and str chan 0
Nov 1 06:58:36 SPA112 daemon.notice msgswitchd[205]: MSGSWD RTCP Reqt len 12 Data 2,1965716,7312,0
Nov 1 06:58:36 SPA112 kern.warning [17191647.052000] RTCP is running so calling rtcp stop
Nov 1 06:58:36 SPA112 kern.warning [17191647.052000] chan->kmode is present not null
Nov 1 06:58:36 SPA112 kern.warning [17191647.056000] ###### RTCP sock_sendmsg return 172
Nov 1 06:58:36 SPA112 kern.warning [17191647.060000]
Nov 1 06:58:36 SPA112 kern.warning [17191647.060000] #### RTP STOP Flag set in this channel break ####
Nov 1 06:58:36 SPA112 kern.warning [17191647.060000] ###### sock_sendmsg return 172
11-01-2013 10:13 AM
Can you try this config on a SPA8000?
Add logs.
Regards.
11-01-2013 10:31 AM
Don't have any atm with me
Only have them remotly, but can't do any test by calling/transfer.
Is there a way to make this SPA112 work?
11-08-2013 01:26 AM
Hellou? cisco support?
I have about a hundred of this devices and none of them are working!!!!!
I payed for them, and I want support to make it work.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: