cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
5289
Views
0
Helpful
5
Replies

How to setup Spa2100 after WRT54GS

rahultakur
Beginner
Beginner

Hi,

I have SIPURA SPA2100 and broadband router WRT54GS framewire v 7.5 , ata cordless phone .

First Approach: for me  not worked

I have contected broadband modem ethernet cable to WRT54GS router. from WRT54GS LAN I contected to WAN of SPA2100.

and used another LAN of WRT54GS router to PC. and attached SPA 2100 phone jack 1 to my ATA phone.

After this i  dailed " **** "then 110# , opened the browser tab and typed http://<Ip address> . after here i cannot open the web interface of SPA2100.

But I can open WRT54GS router web page.

Second Approach:not worked

I have contected broadband modem ethernet cable to SPA2100 adapter WAN. from SPA LAN I contected to WAN of WRT54GS router .

and used  LAN of WRT54GS router to PC. and attached SPA 2100 phone jack 1 to my ATA phone. But here I hardly conect to internet.

After   dailedly " **** "then 110# , opened the browser tab and typed http://<Ip address> . though i cant access the web interface of SPA2100.

Third Approach : not worked

connect Modem ethernet to WRT54GS router WAN,then conneted ethernet between WRT54GS router  LAN and SPA2100 WAN .

and then plugged cable to  PC LAN to SPA2100.

After several retry i can get Limited internet connection.  though cant access the SPA2100 web interface.

I tried all process but I am not able to connect SPA2100.

Diconnected firewall while doing these steps.

.So, 1. can you please suggest me what are the appropiate steps should be take to configure.

.      2. Do i need to upgrade the Firmwire in my WRT54GS router r? if yes, how to upgrade and what is that file that I have to  download?

Appretiate for any suggestions.

With ragards.

Rahul

1 Accepted Solution

Accepted Solutions

Tomas Chott
Beginner
Beginner

Hello,

at first, try this

Q. I want to use a different computer to access the administration web server.
The address I entered did not work.
A. Use the Interactive Voice Response Menu to find out the Internet IP address.

Follow these steps:

1. Use a telephone connected to the Phone 1 port of the ATA device.
2. Press **** (in other words, press the star key four times).
3. After the greeting plays, press 110#.
4. Write down the IP address as it is announced.
5. Press 7932#.
6. Press 1 to enable WAN access to the administration web server. (maybe restart adapter)
7. Open the web browser on a networked computer.
8. Start Internet Explorer and enter the IP address of the ATA device.

and for check web port "Press 170#"

Regards,

Tomas

View solution in original post

5 Replies 5

Tomas Chott
Beginner
Beginner

Hello,

at first, try this

Q. I want to use a different computer to access the administration web server.
The address I entered did not work.
A. Use the Interactive Voice Response Menu to find out the Internet IP address.

Follow these steps:

1. Use a telephone connected to the Phone 1 port of the ATA device.
2. Press **** (in other words, press the star key four times).
3. After the greeting plays, press 110#.
4. Write down the IP address as it is announced.
5. Press 7932#.
6. Press 1 to enable WAN access to the administration web server. (maybe restart adapter)
7. Open the web browser on a networked computer.
8. Start Internet Explorer and enter the IP address of the ATA device.

and for check web port "Press 170#"

Regards,

Tomas

hello toma

I can go into the sipura web interface page but its asking admin username and password.In Input alert box its says "A username and password are being requested by http://172.16.0.1. The site says: "spa admin"

I bought SPA2100 from Ebay.And the previous owner provider was broadvoice.com  and mine is voiparound.com.

What should i do to get  username and password. Can i Reset  to linksys default username and password .if yes then  how can i do it.

Regards,

Rahul

Hello Rahul,

1/ maybe have SPA products in "R" version and this you cannot reset to factory defaults, only use with last provider

2/ if you have free not "R" version you can reset by enter admin menu **** and the press "73738#"

but adapter can be blocked for reset via Voice Menu

Regards,

Tomas

If it is " R" version then it is no use for me.So, I have to buy new one.

Could you please suggest which phone adapter is good and effordable for home purpose.

Thank you

Rahul

Dear Sir;

Either PAP2T or SPA2102 would make the deal.

SPA2102 provides following features not supported in PAP2T:

- Support for simultaneous G.729 codecs

- Support for T.38 fax.

- Support for basic routing and bridge functionality

Regards
Alberto

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers