I'm looking for product solving my following problem: I need solve connectiong 2 analog phones to VOIP network so that both share the same line (both rings together, both can be used to talk in the same call). It's replacement of current analog solution.
I find PAP2T as gateway with 2 analog ports but not sure it supports my requirements. If not which product is appropriate or do you suggest another solution?
Whats wrong with connecting two telephone sets to one VOIP port through a simple telephone splitter?!!!
Otherwise, you can have each port register with a unique extension number and then configure the "follow me" feature of your IP-PBX system so that when a call is received on one extension it would ring the other as well.
Join us for an exclusive Cisco Customer Connection online briefing: Introducing Cisco Business Wireless Access Points and Mesh Extenders on February 25 at 8 am PT. Cisco product managers will provide a technical deep dive on these new wireless products t...
QuestionDear All,I'm currently looking for firmware version 188.8.131.52 for Linksys SPA400 Analog Telephony Gateway. Unfortunately, my device was bricked and I was able to recover it using a recovery tool and recovery firmware version 184.108.40.206 but can't find v...
Change in ASD Automatic Software Download Feature
Dec 13th, 2019
Cisco RV160, 260, 340, and 345 Series Routers
Due to an API change in Cisco’s software download platform the Automatic Download Feature (ASD) on RV series routers will be temporarily ...
SFP Module Support List for RV160x and RV260x Devices
Small form-factor pluggable (SFP) ports are included on the RV160 and 260 routers to allow the use of optical SFP transceiver modules. SFP’s convert the optical signals to electrical signals. SFP’s al...