cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Welcome to the Cisco Small Business Community

Have a question? Click on a topic board below to get started in the community.
Get the latest news in this issue of the Cisco Small Business Monthly Newsletter

3019
Views
0
Helpful
4
Replies
Highlighted
Beginner

Netmask on (SPA400, SPA8000, PAP2T)

I plan to buy several Linksys products: SPA400, SPA8000, PAP2T.

In the past I had a problem related with the restriction in the network mask on the other product Linksys WRT54GR (I can't set netmask 255.255.0.0 but only 255.255.255.0).

Has anyone used/knows SPA400, SPA8000, PAP2T... are they enable to set netmask 255.255.0.0?

Everyone's tags (3)
1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Cisco Employee

Re: Netmask on (SPA400, SPA8000, PAP2T)

Hi vzhuravlev,

I'm not aware of any policy to restrict netmasks in our products.

I tested the products for you. I have opened two CDETS against the SPA2102 and SPA3102. They accept /8 and /16 netmasks, but will not transmit traffic if any mask other than a /24 is applied.

Device/8/16/24
SPA400noyesyes
SPA2102CSCtb99007CSCtb99007yes
SPA3102CSCtb99021CSCtb99021yes
SPA8000yesyesyes
SPA8800yesyesyes
SPA9000yesyesyes
PAP2Tyesyesyes


Regards,

Patrick

----------

View solution in original post

4 REPLIES 4
Highlighted
Participant

Re: Netmask on (SPA400, SPA8000, PAP2T)

Good Morning,

The Linksys product line is designed around a Class C subnet (255.255.255.0)

It is designed to work with small business and home use.

I hope this answers your question

Have a good day :)

Highlighted
Beginner

Re: Netmask on (SPA400, SPA8000, PAP2T)

Good Morning,

Thank you for your quick reply! This information looks like a policy of company for this products. But actually it's not for all Linksys products. I contacted with the tech.support of Linksys about WAP54G. They said there is no problem to set netmask 255.255.0.0 for Static IP on WAP54G. This settings were checked in their test lab. That is why I asked the question for this concrete products (not for all Linksys products).





Highlighted
Cisco Employee

Re: Netmask on (SPA400, SPA8000, PAP2T)

Hi vzhuravlev,

I'm not aware of any policy to restrict netmasks in our products.

I tested the products for you. I have opened two CDETS against the SPA2102 and SPA3102. They accept /8 and /16 netmasks, but will not transmit traffic if any mask other than a /24 is applied.

Device/8/16/24
SPA400noyesyes
SPA2102CSCtb99007CSCtb99007yes
SPA3102CSCtb99021CSCtb99021yes
SPA8000yesyesyes
SPA8800yesyesyes
SPA9000yesyesyes
PAP2Tyesyesyes


Regards,

Patrick

----------

View solution in original post

Highlighted
Beginner

Re: Netmask on (SPA400, SPA8000, PAP2T)

Hi, Patrick

Thank you very much! It's good news for me!

--

Vlad