We have few PAP2T devices which show production date as 01/2008. These devices carry firmware 3.1.15(LS) and hardware version 0.3.5.
Under CISCO download area, I see a firmware version 5.1.6 for PAP2T which has release date Nov 2007. Wondering, how we can verify if it is right version for our devices, while release notes say it is for PAP2 and PAP2T. I am doubtful because of firmware release date and our devices production dates, i.e. why our devices didn't come with this firmware. Any feedback is welcome. :)
please upgrade your PAP2T (PAP2s will carry a different firmware) to 5.1.6 since sometimes the ones coming from factory are a bit outdated (like in your case).
previous firmware: 3.1.15
new upgrade: 5.1.6
Problem: Can not login after upgrade and password change
What I did in exact sequence..
I knew my admin password.
I was today able upgrade successfully using firmware download from cisco.
After the upgrade, I connected to PAP2T device, I went to advanced view.
I changed my SIP settings on LINE1 tab to the settings provided by new SIP service provider.
I saved. The device reconnected. Line 1 has been activated, Light is now on the device.
I chaned to SYSTEM tab, entered a new password. New password is 14 character long. it has a special char, digits case sensitivity, (really strong password) I could see it on screen, verified it.
I saved. The device reconnected.
Three lights; Power, Internet and LINE 1 lights are ON.
When I connect to the device in browser.
Now it is asking a password,
I have used
password: tried old one, new one
I can not login to the device.
What went wrong ?
Is there a change in the default userid ?
What are my options?
Thanks for the support.
I suggest (if you have the SIP account data) to factory reset the device. The most probable reason is that you entered a different password to the one you are entering now.
I have Linksys PAP2 2 port voip gateway.
my server is only register for TCP port.
when we configure PAP2 ,there is no option to select TCP,please help to configure PAP2