Hi
After moving the adapter from one room to another, it stopped working. Lights are flashing in an unknown to me way (See video: http://ppl.ug/hzwnj2VTDog/)
Can anyone explain the meaning of this?
Everything else working as it used to (modem, router, wifi, I tested ATA's power adapter, tried different cables). The router sees (ethernet light goes green for the specific connector) it only for 2-3 seconds whenether the Internet light goes on, then it turns off. I can see an IP of a connected device (in the web interface of the router) but it doesn't describe it, pinging it - Request timed out.
Please help, the device had been working for years non stop w/o any issue!
LED | Action | Condition |
Ethernet | Off | No Ethernet port connectivity |
Ethernet | On | Ethernet port connectivity |
Ethernet | Blinking | Ethernet port activity |
Phone 1-2 | Off | Phone is not provisioned or registered |
Phone 1-2 | Fast Blinking | Blinks when the phone is in use or an incoming call is detected |
Phone 1-2 | On | Registered/Provisioned |
Power | Off | No power to device |
Power (Blue) | Fast Blinking | Booting Up |
Power (Blue) | Slow Blinking (blink blink pause) | Upgrading Firmware |
Power (Blue) | On | Completed bootup and running Firmware |
Power (Red) | On | Problem with device (disconnect the power, wait 5 seconds, reconnect the power) |