cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1197
Views
0
Helpful
1
Replies

Problem with SPA122 and Linksys E3000

gestinfoweb.inc
Level 1
Level 1

Hi,

i try to configure , my SPA122 and linksys, but i need your help ,,,

My ISP is Videotron with Ip Static

the WAN go on SPA122 and after go in the Wan router Linksys

My config of SPA122 is

Network Service = NAT

Internet Connection = Static IP (some parameter of ISP give me up)

Network Setting = Router Ip 192.168.15.1

DHCP = Enable

Gateway= 192.168.15.1

Starting Ip = 192.168.15.100

Maximum = 150

_____________________

My config of Linksys E3000

Internet Connection = Automatic

Network Setting = Router Ip 192.168.1.1

DHCP = Enable

Starting Ip = 192.168.1.100

Maximum = 150

When i open the port 192.168.1.108(camera) tcp/udp:1024 under SPA122 at Port Forwarding (Doesn't work, my port was stay closed)

i do the same config under Linksys at Application/Gaming the same port and ip and say the same (port closed) (under web www.canyouseeme.org)

I need some you help ,,

Thanks

1 Reply 1

gestinfoweb.inc
Level 1
Level 1

No body as solution ,,,,

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: