Pushing an XML configuration to an SPA112 using 'curl' as documented in the Provisioning Guide “Applying a Profile to the IP Telephony Device” page-36 doesn't appear to work on this OpenSuSE Linux system.
This problem evidently arises because the ATA access credentials (&xuser=<admin>&xpassword=<password>) are included in the destination URL.
However logging interactively into the ATA ADMIN account using a browser then executing the CLI curl command without access credentials:
Unfortunately, documentation is imperfect. Cisco doesn't follow all changes in firmware - so it may be syntax for an old firmware (even original 1.0.2 which is no longer available at all). Or you hit firmware bug - unfortunately, Cisco doesn't care bug reports so much from users with no service contract (and even with it your chances for fast solution are not so good).
My advice ? Forget pushing using curl. Lets SPA112 fetch configuration from your Linux server instead. It can fetch it periodically, so there may be some delay, but it works.
And if you have local Asterisk, you can trigger fetch of configuration from it.
Note that new configuration causes device reboot most of time - thus service disruption for users.
Small businesses are facing the realities of the new normal and wondering what are the best ways to monitor, protect, manage and grow. Cisco understands the unique needs of small businesses and is committed to help overcome their top IT challenges. The fi...
What does the new normal mean for small business? Join this CiscoChat to learn how Cisco Designed, the portfolio curated for small business, can help small businesses adapt and thrive through the new normal and beyond.
We'll take your questions live...
Hi, i have an RV130W Wireless VPN router on which contrary to all advertisements i do not have gigabit LAN.The port links state 1000 full duplex however any LAN transfer is capped at about 20MBps, primarily because the router CPU reaches 100%. So this giv...
Join us in an exclusive Cisco Customer Connection briefing for a demonstration on the management capabilities within the Cisco Business Wireless product line for small businesses. For the lone-IT-superman, it is critical that the network products are easy...
This may be a simple question so I hope someone can help. We have several Cisco SG300\500 switches in L2 mode. Each switch has 8 VLANS and VLAN 1 is still native (For now). We do all routing between VLAN's on our firewall. After reading several ...