cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Welcome to the Cisco Small Business Community

Have a question? Click on a topic board below to get started in the community.
Get the latest news in this issue of the Cisco Small Business Monthly Newsletter

998
Views
0
Helpful
4
Replies
Highlighted
Beginner

Registering ATA187 in CME 9.1

Hello guys,

I am currently having difficulty in registering ATA187 in CME 9.1. I recently upgraded to 9.1 as it is mentioned inhttp://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/cme91spc.html
that CME 9.1 supports ATA187. It is said that the SIP firmware is supported, but I searched the SIP firmware for ATA187 in the Cisco website and found nothig

Any help will be appreciated.

Everyone's tags (2)
1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Hall of Fame Master

Registering ATA187 in CME 9.1

Actually you asked about SIP firmware location, the answer is all firmware is SIP.

Al devices ships loaded with firmware. Sometime, it may be necessary to update it.

View solution in original post

4 REPLIES 4
Highlighted
Hall of Fame Master

Registering ATA187 in CME 9.1

ATA187 only supports SIP. It does not supports SCCP.

Highlighted
Beginner

Registering ATA187 in CME 9.1

Yes, that I understand (I already mentioned it in my question). However I cannot find any ATA187 SIP firmware in the Cisco website. Or is it already embedded in the ATA hardware?

Highlighted
Hall of Fame Master

Registering ATA187 in CME 9.1

Actually you asked about SIP firmware location, the answer is all firmware is SIP.

Al devices ships loaded with firmware. Sometime, it may be necessary to update it.

View solution in original post

Highlighted
Beginner

Registering ATA187 in CME 9.1

Thanks Paolo for the information. I have successfully registered the ATA187 by creating SIP endpoints.