recently I bought few of SPA112 gateways, and I have two problems:
1. provisioning using xml file; device is not using new vlan setting (other settings such as dialplan, line number, user and passwd are working correctly), what I'm trying to apply is identical to setting used in other Sipura devices:
<!-- VLAN Settings -->
Also tried with putting above setting in <router-configuration> but no luck.
2. it seems that after putting gateway from web service to use vlan, it still sits on access. This is what I see:
I din't understand ur requirement exactly, even i dont have any idea baout the device that u mentioned...u can use the native vlan 127 command on the trunk..if this is a switch and remove the vlan 499 if u want..
Sure I can remove untagged vlan499 from switch port, but that's not the point. Gateway mac address, after setting its interface to tagged vlan127 shouldn't appear on untagged vlan499, but it does. Sometimes you have to leave tagged and untagged vlan on port.
At the moment, bigger problem for me is this provisioning setting which doesn't appear to work...