08-25-2012 09:32 AM - edited 03-21-2019 09:51 AM
Does anyone know a command line script that can periodically soft reboot the SPA112?
Firmware 1.2.1 still hasn't fixed the uptime issues and the unit reguarly locks up after 2-3 days with no dial tones and response to web admin requests.
You then need to hard reset the unit by pulling the power cable and replugging again.
Tried using the following command:
http://spa112ip/reboot&xuser=username&xpassword=password
but receive a "405 Method Not Allowed!" error.
Tried using Curl but there are ASP session ID's for the login and Javscript prompts when hitting the Reboot page directly:
Thanks
08-27-2012 04:45 PM
Since you are having regular lock ups, can you send a debug log of this? I'd like to get a developer to take a look at the log to see what's happening.
Logging details at https://supportforums.cisco.com/docs/DOC-9862
08-29-2012 03:48 PM
We started having this issue as soon as we started using 1.2.1 We had about 20 with this problem in the field out of 20
I have reverted back to 1.1.0
08-29-2012 04:56 PM
Can you get a log of this? We need to get at the bottom of this problem. Thanks.
08-29-2012 06:39 PM
I like my customers too much to run known buggy code. I will try in my lab but I have not seen this issue. I only see the devices unregistered and when I plugged in a phone they re register
08-29-2012 06:41 PM
I just noticed. You need admin before reboot so
Http://(ip)/admin/reboot
Also you can try wget
11-02-2012 07:17 AM
11-13-2012 06:48 AM
This appears to be related to https://supportforums.cisco.com/message/3779434#3779434
Regards,
Patrick
----------
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: