cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Welcome to the Cisco Small Business Community

Have a question? Click on a topic board below to get started in the community.
Get the latest news in this issue of the Cisco Small Business Monthly Newsletter

7643
Views
1
Helpful
6
Replies
Highlighted
Beginner

SPA112 SPA122 Reset button

Hello,

in the new FW 1.2.1 it is possible to enable or disable the reset button.

Is it also possible to restrict the button to reset 'user values' only and to leave the 'admin values' intact? Or to distinguish between a network factory reset and a voice factory reset?

Live long and proper,  ;-)

  Eik

Everyone's tags (5)
6 REPLIES 6
Highlighted
Frequent Contributor

SPA112 SPA122 Reset button

The provisioning file contains the parameter which is called Reset_Button_Enable

Highlighted
Beginner

SPA112 SPA122 Reset button

Sorry, that wasn't my question/request!

Eik

Highlighted
Beginner

SPA112 SPA122 Reset button

Under Administration > Factory Defaults, there should be options to choose whether or not to reset the Network and Voice settings separately.

Highlighted
Beginner

SPA112 SPA122 Reset button

@terryip83: I know, but it has nothing to do with the reset button!

I suggest to extend the values for the Reset_Button_Enable as follow:

0: disable completely

1: enable completely

2: enable restart only

4: reset only network settings

8: reset only voice settings

16: reset only "ua=rw" settings

Values 2 to 16 are bit flags that can be or'ed. Setting bit 1 sets the complete value to 1 (for backward compatibility).

By this the service provider has full control of what the user can reset with this button and what she cannot. The solution now is quite restrictive!

Regards,

  Eik

Highlighted
Beginner

SPA112 SPA122 Reset button

I think currently, if the reset button is enabled, the length of time you hold it down for will determine either a restart only or factory default. But, yeah, it is a neat idea being able to control how much hassle you end up with when a user resets their device. I've had to remote reprovision a few of these already.

Highlighted
Beginner

SPA112 SPA122 Reset button

@terryip83: by now I advice to disable the reset button completely. The device behaves like the well functioning old legacy devices, that had no reset button. You can save yourself a lot of trouble with your customers and setups ;-)

But why shall one always disable it, if you do have such a neat button? That`s where my feature suggestion comes in :-)

Eik