SPA122 1.3.1 Still having issues

[flambany1]

Hi,

I upgraded my SPA122 firmware from 1.2.1 to 1.3.1 on january 11. After running 10 days without issues (way better then 1.2.1) , the ATA  was unable to register to the sip server. I had to reboot the unit then, it was able to register again.  I had also problems in the late days with call-waiting.

I hope that a new firmware will be available soon.

[George Spanos]

Are you on v1.3.1-003? That's the latest release that was provided as beta and is now "GA" on cisco's website. I have multiple units up and running 16+ days without issue.

Checked syslogs for the time period of your registration issue? With the 1.2.1-004 version, I noticed when the device got stupid it was sending.

REGISTER--->

<---UNAUTH

REGISTER-->  (NOT including digest w/ MD5 password

<---UNAUTH

So registration failed because it wasnt authenticated. Seeing anything like that?

[flambany1]

Hi George,

I'm on 1.3.1-003 and I downloaded it right on the official support site when it became available. I will take a look at my logs this weekend and give you a feedback on this

thanks!