cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Please be advised, the GuideMe Wizard is no longer available on the Small Business Support Community. For search capability please use the community search field to find content related to Cisco Small Business documents, videos, and discussions.
3170
Views
0
Helpful
17
Replies
Highlighted
Beginner

SPA122 freezes when upgrading to 1.3.1(003) via provisioning

Sam, yes it is available. I am testing on 1.3.1-003 and 1.3.2-007 though so it may be recent change after 1.2.1-004.

Here's what it shows after I post that URL:

SPA122 will upgrade to the new firmware when it is not in use.

Fast blinking of the Status LED indicates that firmware upgrade is in progress.

Please do

NOT

unplug the power while the Status LED blinks rapidly.

You can click

Here to return to the login page when the upgrade is completed.

Aaron, sorry I don't know what else to tell ya. It was painful upgrading the SPA's, I think around 10 of 60 devices froze and needed a reboot and a second upgrade. (That's after I had initially remotely rebooted them, upgraded then they froze). We've been running stable on 1.3.1-003 with no complaints for months so I luckily haven't had to experiment with them any further for now. It's good practice though for future hosted pbx w/ Cisco SPA IP phones.

Beginner

SPA122 freezes when upgrading to 1.3.1(003) via provisioning

Happy to see the new firmware is out-

I tried using george's suggestion (like the spa2102)

http://IP ADDRESS/admin/upgrade?http://SERVER/spa122.bin

on all versions including Version 1.3.1 (003)

and I get 405 Method Not Allowed !

The devices are set to download the firmware automatically (again like the 2102's) and as well they do not.

Only from the webGUI am I able to upgrade...

Beginner

SPA122 freezes when upgrading to 1.3.1(003) via provisioning

HI all,

Anyone figure out how to have the device remote upgrade?